CFS - Coating & Finishing Services
Coating & Finishing Home Page
Coating & Finishing Services
CFS Brochure PDF Download
Contact Coating & Finishing services
Coating & Finishing Profile

 

The Old Brickworks,
Harborough Road
Pitsford, Northampton. NN6 9AA

Tel: 01604 881140
Fax: 01604 881141
Email: click here to launch

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   
 
Powder Coating
   
  We coat small items in small numbers to one-offs, prototypes, very large structures, bus shelters, gates, railings, outdoor furniture and a whole lot more. In fact we powder coat any fabrication in any metal.
   
  Stove Enamelling
   
 

We provide this service for fine work and odd colours .

RAL Colour Wheel Unlike Powder coating this is a wet paint system, which is excellent for those special finishes and fine work. This system requires a primer coat, and is also stoved out in an oven, giving a very durable finish. Whilst we do not hold these paints in stock, they are available in most B.S. or RAL colours on a next day delivery from our paint manufacturers, in quantities as small as 1 litre. This makes for competitive prices on those 1 off jobs with obscure colour requirements.

   
  Industrial Painting
   
  All single pack epoxy coatings 2 pack finishes and special coats to any specification
   
  Blast Cleaning
   
  To B.S. and Swedish standards. Blast room size is 5.5m x 5.5m x 18m.
   
  Metal Spraying
   
  Zinc and Aluminium for the protection of Iron and Steel prior to further finishes. Zinc is an excellent base for long term paint systems, such as North Sea and coastal environments. Aluminium has good high temperature qualities and is used extensively on industrial exhaust systems and heat shields.
   
  Stoving Capacity
   
  Capacity is up to 10 metres.
   
  Colour Range
   
  Wide range of colours in stock that conform to BS4800 and RAL standards.
   
  Shotblasting
   
  Shotblasting is a cleaning process for metals, working to B.S. and Swedish Standards. We operate a manual blasting system, and can handle, large or awkward shaped objects. This process is used prior to metalspraying, using chilled iron grit the blasting will abrade the surface of the metal, thus giving a key for the pure molten Zinc or Aluminium to adhere to. It will also remove any rust, scale or existing paintwork prior to the application of primers or other decorative finishes.